1/8' Airless Fluid Hose - (5,000 psi) for Sames - Kremlin® (Non - OEM)

Manufacturer: Total Finishing Supplies

Part Number: 15108030X

Comparable Part #: 050 - 360 - 10X or 05036010X

Description: 1/8' Air Assisted Airless Fluid Hose – Green (5,000 psi)

• High Flexibility: The 1/8” ID airless paint spray hose is the most flexible in our high - pressure hose selection. It can be used with Graco® and SAMES KREMLIN® paint sprayers.
• Ideal for Thin Coatings: Perfect for less viscous spray coatings like stains, lacquers, and oil - based paints.
• Reduces Fatigue: Commonly used as a whip hose, it connects the supply hose to the spray gun, reducing hand fatigue for painters.

The 1/8” ID airless paint spray hose is commonly used in shorter lengths and referred to as a whip hose. Connecting the supply hose to the spray gun, this whip hose will reduce hand fatigue and provide great flexibility for the painter.

Fittings: #5JIC Females
Series: PA12 (1/8')
Maximum Working Pressure: 5,000 PSI
Minimum Burst Pressure: 20,000 PSI
Core: Polyamide
Braid: High Tensile Brass - Plated Carbon Steel
Cover: Polyurethane

Hoses are NOT Returnable

NOTES:

KREMLIN®, AIRMIX®, and Xcite® are registered trademarks of Sames Kremlin SA or Exel Industries SA, and the same companies may claim unregistered trademark rights in other words. The advertised parts are intended to fit KREMLIN® and Xcite® spray equipment. They are not, however, manufactured, endorsed, or sponsored by Sames Kremlin SA or Exel Industries SA or any of their affiliates, and no warranty by Sames Kremlin SA, Exel Industries SA, or any of their affiliates applies. Total Finishing Solutions, LLC is not affiliated with or sponsored or endorsed by Sames Kremlin SA or Exel Industries SA and is not one of their authorized distributors.

This 1/8 airless fluid hose with a 5,000 psi rating is great for professional painters and DIY enthusiasts. It's used for spraying thin coatings like stains, lacquers, and oil - based paints with Graco® or SAMES KREMLIN® sprayers. The hose has an ID of 1/8 inches, and the fittings are #5JIC Females. It can handle a maximum working pressure of 5,000 PSI and has a minimum burst pressure of 20,000 PSI. Its core is made of polyamide, the braid is high - tensile brass - plated carbon steel, and the cover is polyurethane.